Leaves are changing colors in Winchester, and before you know it, autumn is turning into winter. The pumpkin spice and coffee latte that you made that morning were not enough to stave the usual chill, and you may need to switch your HVAC system to the heat setting.
If this is the case, you better check if your appliance is ready for the coming winter. See if it needs repairs and ensure that you get the best residential home heaters in Winchester that won’t fail you. Here’s a list of how you can be sure that your furnace is ready to heat your home during a snowy and cold morning.
Turning on the Thermostat
Switch the setting and thermostat controls from cooling to heating. Make sure that the temperature is a little higher than the room temperature. I look forward to the heat kick that should be turned on after a few minutes. If you don’t hear this, you may want to secure the connections and wires around the appliances.
If you’re sure that the connections are snug, check if the power source for the HVAC is turned on. If everything is still not working, check the heat pumps, blowers, and furnace fans. It may also make sense to call a professional in Winchester for further assessments.
Change Air Filters
There may be air filters for vents, ceilings, and walls in your home. In some cases, the air filters are located in the HVAC system itself. You need to change the filter every quarter or twice a year. There are electrostatic filters that are permanent to each appliance. If this is so, wash this and reuse the entire thing.
Washing and replacing the filters regularly or once every few months will make the air healthier inside your home. It keeps the particles, dust, mold, and other contaminants from going into your HVAC system, and you can prolong its life as a result. While you are in the process of cleaning, you may also want to change the filters for your humidifier and set the humidistat to ensure that it’s working correctly. The humidifier applies to those HVAC systems that have them.
Cover the Condenser of the Air Conditioner
Cover the condensers during wintertime to protect your HVAC system from falling icicles. However, this is not recommended if you have a heat pump on your system as this needs to run all year. A large trash bag with a knotted lid made from bungee cords can work well as covers. Board the fans to cover them but avoid plastic tarp that can cause moisture inside it.
Maintaining and Cleaning the Heat Exchanger
Heat exchangers should be vacuumed and brushed at least twice a year by a qualified professional in Winchester. Know more about the heat exchangers on this page here. This should be done while disabling the unit and switching off the HVAC systems, says one of the experts in HVAC.
While being cleaned, the technicians will look for signs of damages or cracks and do repairs on them in the soonest time possible. This is because the cracks can lead to leakage of carbon monoxide inside the home, which can be toxic to the occupants.
Testing of the Igniter Switch
In older appliances, you may have to rely on pilot lights for the furnace to work. Nowadays, newer technologies have igniter switches and electronic ones to activate in a single push of a button. If this ignitor is not working as intended, you can try to restore the settings with a reset button’s help. Check the breaker if it’s working, and call a professional if you’ve already tried everything, but it still doesn’t work.
Clean and Lubricate the Motor Blower
The owner’s manual will give you the information that you need to lubricate the motor. If you are going to try this, it’s a must that you should turn off the power first. Clean the caps, open the covers, and check the bearings. Lubricate them with oil that’s made explicitly for HVAC appliances. If you are unsure of what to use, you can contact an expert near you for more information.
Inspect the Carbon Monoxide Detectors and the Chimney
Chimneys can become home to carbon monoxide build-up as well as birds’ nests. You need the right contractors to inspect them at least once every six months for routine checking. They can place detectors of carbon monoxide and provide your home with fresher air to protect you from these silent killers.
Check the Tank Levels, Nozzles, and Filter of your Furnace
If you have an oil-powered furnace, you may want to do different maintenance than the gas-powered ones. Read more about electric heating here: https://en.wikipedia.org/wiki/Electric_heating. The filters may require periodic changes and cleaning of burner nozzles. There may be a heat-exchanger brushing needed because the oil doesn’t burn more cleanly than the gas-powered ones.
Other Tips for Heater
- Set the thermostat at a very comfortable level during the winter. Change the settings to the lowest setpoints when you are going away or while you’re sleeping.
- Replace or clean the filters thoroughly as recommended by the manufacturers
- Clean the baseboard heaters, radiators, and warm-air registers if possible; ensure that the carpets, drapes, or furniture are not blocking them.
- Eliminate trapped air from water radiators twice every season. If you are unsure about doing this task, you can call a professional HVAC technician in Winchester to help you out.
- Turn off the bath and kitchen exhaust fans in about 20 minutes after you’re finished with bathing or cooking; when deciding to install them, choose those that have low-noise models and high-efficiency varieties.
- In wintertime, keep the shades and draperies on the south to allow some sunlight to enter the home. Keep the windows closed at night to reduce the chill.
These are just some of the steps that you can do to get your furnace ready during wintertime. It’s better to get a professional to check them as early as possible so that you won’t be in the situation where you need to deal with the cold when they unexpectedly stop working on you.